Filter
Top Products
XG2000 series User's Guide
247/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.19.2 show system information
Function
Displays the operational status of the device.
Prompt
xg> or xg#
Command syntax
show system information
Command type
Operation management command
Output form
xg# show system information
System Information 2007/01/22-21:06:11
=======================================
System Name (hostname) : xg
System Location
: (none)
System Contact : (none)
Default Banner : XG2000 E10L11 Z01
Startup Time
: 2007/01/22-19:28:24
Startup-config Modified
: 2007/01/22-19:54:01
Firmware Information
Firmware[1] : E10L10 Z01 2007/01/21-18:42:52
Updated Time
: 2007/01/21-22:08:12
Firmware[2] : E10L11 Z01 2007/01/22-19:27:12
Updated Time : 2007/01/23-10:57:53
Current Firmware
: [2]
Next Startup Firmware
: [2]
Boot Loader : E10L10 Z01
Timezone : gmt +0900
(Next Boot)
: gmt -800
Summer-Time : (none)
(Next Boot) : M4.1.0/0200 M10.5.0/0200 0100
RS232C Baud-Rate
: 9600
Management LAN Information
MAC Address : 0080.17c2.0500
IP Address/Mask
: 192.168.41.22/24
Default Gateway : 192.168.41.1
DNS Server : 192.168.77.20
Domain Name : abc.efg.com
System Load Information
CPU Used Ratio
: 1%
Memory Used Size
: 36,429,824 bytes (57%)
z System Name (hostname)
Displays the system name (host name) of the device.
z System Location
Displays the installation location of the device.
z System Contact
Displays the contact information of the device.
z Default Banner
Displays the default banner string displayed during user login.
z Startup Time
Displays the date and time when the system was started up.
z Startup-config Modified
Displays the date and time when the “startup-config” setup was last updated.
z Firmware Information
Displays the firmware status of the device.
The system retains up to two sets of firmware information (old and new firmware information)
and firmware images.
− Firmware[1] / Firmware[2]
Displays the firmware information of firmware partitions 1 and 2 and the firmware update
status.
(No display other than revision and revision date)
The new firmware is not being updated.
(writing)
The new firmware is being updated.
(new)
The firmware was updated.
(incomplete)
The switch fails to update the new firmware.
Retry to update the new firmware.
− Updated Time
Displays the date and time when the firmware was last updated.
− Current Firmware
Displays the partition number of the firmware currently being used for system startup.
− Next Startup Firmware
Displays the partition number of the firmware to be used for the next system startup.
− Boot Loader
Displays boot loader revision.