Filter
Top Products
XG2000 series User's Guide
90/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.5 RADIUS/TACACS+
This section explains the commands related to RADIUS/TACACS+.
5.5.1 show authentication
Function
Displays the setting status of authentication method.
Prompt
xg#
Command syntax
show authentication
Command type
Operation management commands.
Output form
xg# show authentication
Authentication Information 2008/05/20-16:23:25
===============================================================================
Serial/Telnet(console)
====================================
Login Primary : Local
Login Secondary : none
SSH(ssh)
====================================
Login Primary : RADIUS
Login Secondary : none
===============================================================================
z Login Primary
Displays the primary login authentication method.
− Local
Local authentication based on the account information stored in the device is used.
− RADIUS
RADIUS authentication using PAP(User Password) is used.
− TACACS+
TACACS+ authentication using PAP(User Password) is used.
z Login Secondary
Displays the secondary login authentication method. Secondary login authentication is used
if primary login authentication is failed.
− Local
Local authentication based on the account information stored in the device is used.
− none
Secondary login authentication is disabled.
Example
Displays the setting status of authentication method.
xg# show authentication