Fujitsu XG2000 Switch User Manual


 
XG2000 series User's Guide
285/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Message ID
Severity
Message/Explanation/Solution
S2112
ERROR
ME Halt detected. %1$
Explanation
An uncorrectable error was detected in the switch chip.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
Note the message contents and contact the sales representative.
S2200
WARNING
MAC Table Error detected. %1$
Explanation
An uncorrectable error was detected in the MAC address management table.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
Note the message contents and contact the sales representative.
S2201
WARNING
Too Many MAC Table Error. Reset Switch LSI.
Explanation
An uncorrectable error was repeatedly detected in the MAC address management table. The switch chip was
reset.
Solution
Note the message contents and contact the sales representative.
S2202
WARNING
VLAN Table MBE detected. %1$
Explanation
An uncorrectable error was detected in the VLAN management table.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
Note the message contents and contact the sales representative.
S2203
WARNING
VLAN Table SBE detected. %1$
Explanation
An uncorrectable error was detected in the VLAN management table. It is automatically corrected by hardware.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.
S2204
WARNING
Too Many VLAN Table MBE Errors. Reset Switch LSI.
Explanation
An uncorrectable error was repeatedly detected in the VLAN management table. The switch chip was reset.
Solution
If the same message reappears after restarting the switch, note the message contents and contact the sales
representative.
S2205
WARNING
Too Many VLAN Table SBE Error. Log Disabled.
Explanation
A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled.
Solution
Note the message contents and contact the sales representative.
S2206
WARNING
Multicast State Table Error detected. %1$
Explanation
An uncorrectable error was detected in the switch chip.
z [[Inserted string]]%1$: Supplementary code for the error
Solution
Note the message contents and contact the sales representative.
S2207
WARNING
Too Many MST Errors. Reset Switch LSI.
Explanation
An uncorrectable error was repeatedly detected in the switch chip. The switch chip was reset.
Solution
Note the message contents and contact the sales representative.