Filter
Top Products
XG2000 series User's Guide
149/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.10.7 flowcontrol
Function
Configures PAUSE flow control .
Use the no form to return to the default setup.
Prompt
xg(config-if)# or xg(config-agg)#
Command syntax
flowcontrol { disable | only-receive | | only-send | send-receive }
no flowcontrol
Parameter
z disable
Disalbe PAUSE flow control.
z only-receive
Enables Rx PAUSE flow control.
z only-send
Enables Tx PAUSE flow control.
z send-receive
Enables Tx and Rx PAUSE flow control.
Command type
Configuration command
Default
only-receive
Example
Enable Tx and Rx PAUSE flow control .
xg(config-if)# flowcontrol send-receive