Filter
Top Products
XG2000 series User's Guide
30/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
4.2 Port Mirroring
It is possible to monitor the traffic by mirroring the frames sent or received by a port to another port.
To configure port mirroring, carry out the following procedure in the administrator EXEC mode.
Command Task
xg# configure terminal
Switch to global configuration mode.
xg(config)# mirror monitored-port <1-20>
[rx-mirroring-port <1-20>]
[tx-mirroring-port <1-20>]
Configure the port to be monitored and its mirror port to
be mirrored.
xg(config)# exit
Exit to administrator EXEC mode.
xg# show mirror
View the status of port mirroring.