Filter
Top Products
XG2000 series User's Guide
95/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.5.6 radius-server timeout
Function
Specifies timeout for access replay from a RADIUS server.
Use the no form to return the setting to its default.
Prompt
xg(config)#
Command syntax
radius-server timeout <1 – 15>
no radius-server timeout
Parameter
z timeout <1 - 15>
Specifies timeout for access replay from a RADIUS server in seconds.
Command type
Configuration command
Default
None
Note
z The timeout is referred only when a RADIUS server is registered. It is necessary to register RADIUS servers again if
the timeout is changed so that RADIUS servers use new setting.
Example
The following example specifies the timeout in 10 seconds.
xg(config)# radius-server timeout 10