Filter
Top Products
XG2000 series User's Guide
265/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
6.1 Verifying the Device Operations
This chapter describes the management of the device.
z Hardware status
z System status
z Log messages
6.1.1 Verifying Hardware Status
Verify the status of hardware by entering the "show system status" command in the operator EXEC mode or in the
administrator EXEC mode. The following example shows the information that is displayed when the "show system status
"
command is entered.
xg# show system status
System Status Information 2007/01/25-12:16:19
==============================================
[Temperature]
Internal : good
[Power Supply]
PWR-0 (AC) : good
PWR-1 (AC) : good
[Voltage]
Voltage : good
[Fan]
Rear Fan-0 : good (normal-speed)
Rear Fan-1 : good (normal-speed)
PWR-0 Fan : good
PWR-1 Fan : good
[XFP]
port 1 (VENDER-NAME. :S ) : good
port 2 (VENDER-NAME. :L ) : good
port 3 (VENDER-NAME. :S ) : good
port 4 (VENDER-NAME. :L ) : good
port 5 (VENDER-NAME. :S ) : good
port 6 (VENDER-NAME. :L ) : good
port 7 (VENDER-NAME. :S ) : good
port 8 (VENDER-NAME. :L ) : good
port 9 (VENDER-NAME. :S ) : good
port 10 (VENDER-NAME. :L ) : good
port 11 (VENDER-NAME. :S ) : good
port 12 (VENDER-NAME. :L ) : good
port 13 (VENDER-NAME. :S ) : good
port 14 (VENDER-NAME. :L ) : good
port 15 (VENDER-NAME. :S ) : good
port 16 (VENDER-NAME. :L ) : good
port 17 (VENDER-NAME. :S ) : good
port 18 (VENDER-NAME. :L ) : good
port 19 (VENDER-NAME. :S ) : good
port 20 (VENDER-NAME. :L ) : good