Filter
Top Products
XG2000 series User's Guide
250/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.20 System Maintenance Commands
5.20.1 clear log
Function
Initializes the system log.
Prompt
xg#
Command syntax
clear log [ { info | warning | error | critical } ]
Parameter
z { info | warning | error | critical }
Specifies the type of system log to be initialized.
− info
Initializes the INFO log.
The INFO log stores informational (INFO) messages that report on the system status
of the device.
− warning
Initializes the WARNING log.
The WARNING log stores warning (WARNING) messages that report on the system status
of the device.
− error
Initializes the ERROR log.
The ERROR log stores error (ERROR) messages that report on the system status of the
device.
− critical
Initializes the CRITICAL log.
The CRITICAL log stores critical (CRITICAL) messages that report on the system status
of the device.
If this log-type parameter is omitted, all logs are initialized.
Command type
Operation management command
Example
Initialize the INFO log:
xg# clear log info