Filter
Top Products
XG2000 series User's Guide
98/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.5.9 tacacs-server key
Function
Specifies a global secret key which is used as a default parameter when the TACACS+ server is registered without secret key.
Use the no form to delete a global secret key.
Prompt
xg(config)#
Command syntax
tacacs-server key KEY
no tacacs-server key
Parameter
z key KEY
Specifies a global secret key in ASCII character. Printable characters except for "?" and
a space(ASCII code 0x20) can be specified and its length should be less than 33.
Command type
Configuration command
Default
None
Message
% Secret key is too long.
Explanation
The specified secret key is more than 32 characters.
Solution
Specifies the secret key under 33 characters.
% Invalid secret key.
Explanation
An invalid character is set.
Solution
Specifies a secret key using available characters.
Note
z A global secret key is referred only when a TACACS+ server is registered without specifying a secret key.
z A secret key for a TACACS+ server will synchronize to a new global secret key when the same secret key is specified.
z A global secret key for a TACACS+ server will not be deleted even when no command is committed.
Example
The following example specifies a global secret key.
xg(config)# tacacs-server key tacacs-b1