Filter
Top Products
XG2000 series User's Guide
148/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.10.6 description
Function
Describes the port information.
Use the no form to delete the port description.
Prompt
xg(config-if)# or xg(config-agg)#
Command syntax
description DESCRIPTION
no description
Parameter
z description_DESCRIPTION
Describes the port information using ASCII characters. The description can be up to 64
alphanumeric characters in length.
No need to enclose a parameter in quotes if it contains a blank space.
Command type
Configuration command.
Default
None.
Message
% Port description length is max over.
Explanation
The port description length exceeded 64 characters.
Solution
Specify a port description consisting of up to 64 alphanumeric characters.
Note
Port descriptions are not checked for duplication.
Example
Describes port 3 as “port_name3”.
xg(config)# interface port 3
xg(config-if)# description port_name3