Filter
Top Products
XG2000 series User's Guide
208/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
z Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 33 characters can be displayed.
Output form (if "total" is specified)
xg# monitor traffic-bytes total
Traffic Statistics(Total Frame Bytes) 2007/01/22-12:12:15
==============================================================================
Port Link State/ Tx-Frame Rx-Frame Port-Description
STP State Bytes Bytes
---- ------------- ----------- ------------ ---------------------------------
1 Up/Discard 1234567890K
1234567890K port_name1
2 Down 1234567890G 1234567890G port_name2
3 Up/Discard 1234567890M 1234567890M port_name3
4 Up/Learn
1234567890T 1234567890T port_name4
5 Up/Forward 1234567890 1234567890 port_name5
6 Up/Forward
1234567890 1234567890 port_name6
7 Down
1234567890 1234567890 port_name7
8 Down 1234567890 1234567890
==============================================================================
ESC:exit F:refresh
U:page up D:page down L:page left R:page right
z Port
Same as the display description for the “current” option
z Link State/STP State
Same as the display description for the “current” option
z Tx-Frame Bytes
Displays the accumulated transmission byte count after system startup, using a 10-digit,
right-justified value.
z Rx-Frame Bytes
Displays the accumulated receive byte count after system startup, using a 10-digit,
right-justified value.
z Port-Description
Same as the display description for the “current” option