Filter
Top Products
XG2000 series User's Guide
88/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
5.4.21 banner
Function
Sets the banner string to be displayed when logging in to the device.
Use the no form to delete the banner string.
Prompt
xg(config)#
Command syntax
banner login LINE
banner login default
no banner
Parameter
z login LINE
Sets a banner string. No need to enclose a parameter in quotes if it contains a blank space.
z login default
Returns the banner string to its default ("Product name firmware identification
information").
Command type
Configuration command
Default
"Product name(XG2000, XG2000R, XG2000C or XG2000CR) firmware identification information"
The firmware identification information is the same information displayed in FirmWare[1] or FirmWare[2] of the "
show system
information" command.
Example
Set the banner string to "Welcome to XG2000."
xg(config)# banner login Welcome to XG2000