IBM AS/400e Computer Hardware User Manual


 
Let us say your environment needs four dial-on-demand connection profiles, but
you only need two lines available at one time. You could create a line pool for
two of the four lines, so two connections profiles are active at any time. By using
a line pool, you do not need to have four lines available at the same time.
Configuring Point-to-Point Network Connections
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
Configuring PPP Connection Profiles
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
Accessing Point-to-Point functions through Operations Navigator
You can access Point-to-Point (PPP) functions from a command line interface or
Operations Navigator (graphical user interface). Not all PPP functions are available
on both interfaces, and most PPP functions are available only through Operations
Navigator. Operations Navigator functions are not documented here.
To access the Point-to-Point Profile Properties dialogs, perform the following
tasks:
1. Start Operations Navigator.
2. Double-click your AS/400 server in the main tree view of Operations Navigator.
3. Double-click Network.
4. Double-click Point-to-Point.
5. Right-click Connection Profiles to open a context menu.
6. Select New Profile to open the New Point-to-Point Profile Properties dialog.
Click the desired tab to define properties.
Checking for existing PPP Connection Profiles
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
96 OS/400 TCP/IP Configuration and Reference V4R4
|
|
|
|
|
|
|
|
|