Filter
Top Products
If you specify a value less than the number of virtual devices attached to
QPACTLnn controllers and you want the extra devices deleted, you must manually
delete any virtual devices that exceed the QAUTOVRT limit. If you delete devices to
enforce a smaller QAUTOVRT value, begin by deleting the devices from the
controller with the highest QPACTLnn value.
Note: The workstation gateway server does not manage the QAUTOVRT values
directly. The Telnet application does the managing on behalf of the
workstation gateway server.
Changing the Workstation Gateway Configuration
This topic explains each of the parameters that you control to manage the
workstation gateway server configuration. Specify CFGTCPWSG to display the
configuration (shown in Figure 201).
Select option 1,
Change Workstation Gateway Attributes
. The
Change Workstation
Gateway Attributes
(CHGWSGA) command displays the configuration settings you
can adjust. Figure 202 on page 324 and Figure 203 on page 324 show you the
prompts, which are explained in this topic.
Configure TCP/IP Workstation Gateway
System: SYSxxx
Select one of the following:
1. Change workstation gateway attributes
Related options:
10. Configure HTTP
11. Work with autoconfigure virtual devices
12. Work with limit security officer device access
Selection or command
===> 1
F3=Exit F4=Prompt F9=Retrieve F12=Cancel
Figure 201. Configure TCP/IP Workstation Gateway (CFGTCPWSG) Panel
Chapter 10. Workstation Gateway Server 323