Filter
Top Products
This logon is very similar to the FTP logon to an AS/400. It is necessary to have a
valid user ID and password for the VAX.
Figure 160 shows the results of the QUOTE HELP subcommand (entered on the
AS/400), which lists the subcommands supported by the Wollongong server
software.
Help is not available for individual subcommands. For example, the QUOTE HELP
APPE subcommand returns a message that indicates that no information is
available.
File Transfer Protocol
Previous FTP subcommands and messages:
Connecting to host name MVAX at address 9.4.6.252 using port 21.
220 FTP Service Ready
> TESTER
331 User name TESTER received, please send password
230 TESTER logged in, directory $DISK1:[TESTER]
Enter password:
===>
F3=Exit F6=Print F9=Retrieve
F17=Top F18=Bottom F21=CL command line
Figure 159. VAX FTP Logon Process
File Transfer Protocol
Previous FTP subcommands and messages:
220 FTP Service Ready
> TESTER
331 User name TESTER received, please send password
230 TESTER logged in, directory $DISK1:[TESTER]
> quote help
211-The following commands are accepted:
USER PASS ACCT MAIL MLFL PORT ABOR QUIT NOOP HELP TYPE MODE
STRU BYTE ALLO XSEN XSEM XVRB XTER SYST REIN SITE STAT RETR
STOR APPE DELE RNFR RNTO LIST NLST REST CWD XCWD CDUP PWD
XPWD MKD XMKD RMD
All file specifications must be in VMS** or Unix format.
211 Problems to Postmaster@mvax
Enter an FTP subcommand.
===> quote help
F3=Exit F6=Print F9=Retrieve
F17=Top F18=Bottom F21=CL command line
Figure 160. VAX FTP Server Subcommand Help Display
252 OS/400 TCP/IP Configuration and Reference V4R4