Filter
Top Products
Step 2: Select the Add Exit Program option
Select the add option by typing a 1 (Add) in the Opt column as shown in
Figure 297.
Step 3: Add your exit program
Fill in the exit program information as shown in Figure 298 on page 540 and
Figure 299 on page 540, then press enter.
Notes:
1. You can bypass Steps 1 and 2 by using the Add Exit Program (ADDEXITPGM)
command.
2. You must set the Program number parameter of the Add Exit Program
(ADDEXITPGM) command to 1 when adding exit programs to FTP exit points.
3. When you add exit programs for FTP clients, these programs take effect as
soon as you start additional sessions. Changes do not affect client sessions that
are already running.
Work with Exit Programs
Exit point: QIBM_QTMT_WSG Format: QAPP0100
Type options, press Enter.
1=Add 4=Remove 5=Display 10=Replace
Exit
Program Exit
Opt Number Program Library
(No exit programs found.)
Figure 296. Adding an Exit Program — Display 1
Work with Exit Programs
Exit point: QIBM_QTMT_WSG Format: QAPP0100
Type options, press Enter.
1=Add 4=Remove 5=Display 10=Replace
Exit
Program Exit
Opt Number Program Library
1
(No exit programs found.)
Figure 297. Adding an Exit Program — Display 2
Appendix E. TCP/IP Application Exit Points and Programs 539