Filter
Top Products
You can also return to the Tokyo system using option 11 (Transfer to previous
system). Option 11 sends you to the alternate job at the Tokyo system (Figure 134).
1. Press the System Request key.
2. Select option 11 (Transfer to previous system). You return to the Tokyo system.
From the alternate job at Tokyo, you now want to return to the Chicago system
(Figure 135). You can return to the Chicago system using one of the following:
v SIGNOFF command
v TFRSECJOB command
You can use the Transfer Secondary Job (TFRSECJOB) command to transfer
from an alternate job at a client system to the original job, which is running
Telnet; therefore, you end up at the server system. In Figure 135, the
TFRSECJOB command transfers you to your original job on the Tokyo system,
which is still running Telnet; therefore, you end up on the Chicago system.
v Option 1 on the System Request menu (Display sign on for alternative job)
You want to return to the Chicago system after going back to the Tokyo System
Request menu (Figure 136 on page 224). Do one of the following to return to the
Chicago system:
v From the Tokyo System Request menu, press F3 (Exit).
v From the Tokyo System Request menu, select option 15 (Transfer to end
system).
Figure 133. Starting the System Request at Previous System
Figure 134. Transferring to the Previous System
Figure 135. Transferring a Secondary Job
Chapter 6. Telnet Server 223