Filter
Top Products
Options From WRKTCPPTP
Using Figure 89 as a reference, the following is a summary of selected
management tasks you can do from this display. This information is a supplement to
the information provided in the online help information for the various options. This
information is not intended to be a complete summary of the online text. Be sure
the profile that you want to change, copy, or remove is not active.
Option 1 (Add)
Use this option to add a new configuration profile. See “Step 3 - Determine
Configuration Profile Type” on page 132 for information about the connection
profiles.
Option 2 (Change)
Use this option to change the information associated with a configuration profile
that is not active.
Option 3 (Copy)
Use this option to add a new profile that has the exact same characteristics as
the one being copied.
Option 4 (Remove)
Use this option to remove a configuration profile that is not active.
Option 5 (Display)
Use this option to display a configuration profile.
Option 6 (Print)
Use this option to print the same information about the configuration profile that
you see on the display when you select option 5.
Option 9 (Start)
Use this option to start a point-to-point session for a particular configuration
profile. This option calls the Start Point-to-Point TCP/IP (STRTCPPTP)
command with the name of the profile. If you enter the command and press
F4=Prompt, you can specify:
Work with Point-to-Point TCP/IP
Type option, press Enter.
1=Add 2=Change 3=Copy 4=Remove 5=Display details 6=Print
9=Start 10=End 12=Work with line status 14=Work with session job
Line Line Job
Opt Name Mode Type Status Description Type Name
___ MOLEANS1 *ANS *SLIP INACTIVE ASCSWIT6 *ASYNC
___ NIMROD *ANS *SLIP STRSSN ASCSWIT4 *ASYNC QTPPANS021
___ PEBBLES *ANS *SLIP RINGW ASCSWIT8 *ASYNC QTPPANS020
___ AS8TO7NSW *DIAL *SLIP INACTIVE ASCNONSW3 *ASYNC
___ BAMBAM *DIAL *SLIP INACTIVE ASCNONSW3 *ASYNC
___ DIALW31 *DIAL *SLIP INACTIVE ASCSWIT5 *ASYNC QTPPDIAL90
_14 IBMIGNSP *DIAL *SLIP ACTIVE ASCSWIT7 *ASYNC QTPPDIAL93
___ IBMIGNSP1 *DIAL *SLIP INACTIVE ASCSWIT7 *ASYNC QTPPDIAL83
___ IBMIGNSP2 *DIAL *SLIP INACTIVE ASCSWIT7 *ASYNC QTPPDIAL89
More...
F8=Work with modems F9=Command line F10=Local interface status
F11=Display text F12=Cancel F14=Work with session jobs F24=More keys
Figure 89. Work with Point-to-Point TCP/IP-Working With a Specific Job
Chapter 4. Configuring Point-to-Point TCP/IP (PPP and SLIP) 135