Filter
Top Products
Note: If they are installed, the Client Access host servers are automatically started
when TCP/IP is started.
Changing the IPL Start-Up Program The autostart job in the controlling subsystem
transfers control to the program specified in the system value QSTRUPPGM. You
can tailor this program. For instructions on how to create your own IPL start-up
program, see the
OS/400 Work Management
book located in the AS/400 Online
Library at the following URL address: http://www.as400.ibm.com/infocenter.
REMINDER: Host Table Conversion: If you had a pre-V3R1M0 version of TCP/IP
installed on your AS/400 and you had a local host table with more than 75 entries,
use one of the host table configuration commands, such as CHGTCPHTE or
MRGTCPHT before you run the STRTCP command. Using the host table
configuration commands converts pre-V3R1M0 host tables to the new format
without affecting the performance of the STRTCP command processing.
TCP/IP Jobs
Jobs started by the Start TCP/IP (STRTCP) command are listed in Table 2.
Table 2. Jobs Used by TCP/IP
Job Name Description
QAPPCTCP APPC over TCP/IP applications
QTBOOTP BOOTP server
QTCPIP Main TCP/IP job
QTFTPxxxxx FTP server (there may be several)
QTGTELNETS TELNET server (there may be several)
QTRTDxxxxx RouteD server
QTRXCxxxx REXEC server (there may be several)
QTSMTPCLNT SMTP client
QTSMTPSRVR SMTP server
QTSMTPBRCL SMTP bridge client
QTSMTPBRSR SMTP bridge server
QTTFTxxxxx TFTP server (there may be several)
QTMSNMP SNMP server
QTMSNMPRCV SNMP server
QSNMPSA SNMP server
QTLPDxxxxx LPD server (there may be several)
QTPOxxxxxx POP server (there may be several)
QTPPANSxxx Dial-in (*ANS) support (PPP)
QTPPDIALxx Dial-out (*DIAL) support (PPP)
ADMIN and DEFAULT ICS (HTTP) server
QTWSGxxxxx Workstation gateway (there may be several)
Chapter 2. Configuring TCP/IP 45
|
|
|
|
|
|