Filter
Top Products
System Request Processing—Scenarios
The system request processing for Telnet can differ from the system request
processing for display station pass-through (DSPT) in all the following scenarios
with the exception of the first scenario.
Scenario 1
All systems are AS/400 systems at Version 2 Release 3 (V2R3) or later. The
system request processing for Telnet works the same as the system request
processing for the pass-through (DSPT) support.
Scenario 2
System A is an AS/400 system at Version 2 Release 2 (V2R2) or earlier.
The system request processing is the same as for the Version 2 Release 3 or later
options in the first scenario with these exceptions:
v The System Request menu displayed on System A (the home system) uses
option 11 instead of option 15 to transfer to the end system.
v If you type option 10 at the barred-input line at the bottom of the System Request
menu, the System Request menu for System A is shown. If you type option 11,
an alternate job is started on System A.
System request processing differs from the processing that occurs if you press
the following keys: System Request, Enter, then type either option 10 or 11. In
this case option 10 shows the System Request menu for System C, and option
11 starts an alternate job on System C.
Scenario 3
System D is an AS/400 system at Version 2 Release 2 or earlier.
Figure 138. All AS/400 Systems at Version 2 Release 3 or later
Figure 139. System A at Version 2 Release 2 or Earlier
Chapter 6. Telnet Server 225