Filter
Top Products
To display the jobs, AS/400 runs the WRKACTJOB command. If no SLIP profiles
are started, AS/400 displays the following message:
No active jobs to display.
Figure 91 shows the WRKJOB display for job QTPPDIAL93. For active
point-to-point jobs, option 10 from the WRKJOB display shows you the current job
log. You can use the job log to monitor the job while the job is running.
Work with Active Jobs
CPU %: 11.4 Elapsed time: 07:17:29 Active jobs: 59
Type options, press Enter.
2=Change 3=Hold 4=End 5=Work with 6=Release 7=Display message
8=Work with spooled files 13=Disconnect ...
Opt Subsystem/Job User Type CPU % Function Status
__ QTPPANS020 QTCP BCH .0 PGM-QTOCPPSM ICFW
__ QTPPANS021 QTCP BCH .0 PGM-QTOCPPSM RUN
__ QTPPDIAL93 QTCP BCH .0 PGM-QTOCPPSM ICFW
Bottom
Parameters or command
===>
F3=Exit F5=Refresh F10=Restart statistics F11=Display elapsed date
F12=Cancel F23=More options F24=More keys
Figure 90. Work with Active Jobs-Displaying SLIP Jobs
Work with Job
System: SYSNAM
Job: QTPPDIAL93 User: QTCP Number: 009919
Select one of the following:
1. Display job status attributes
2. Display job definition attributes
3. Display job run attributes, if active
4. Work with spooled files
10. Display job log, if active or on job queue
11. Display call stack, if active
12. Work with locks, if active
13. Display library list, if active
14. Display open files, if active
15. Display file overrides, if active
16. Display commitment control status, if active
More...
Selection or command
===> 10
F3=Exit F4=Prompt F9=Retrieve F12=Cancel
Figure 91. Working with a Job
138 OS/400 TCP/IP Configuration and Reference V4R4