Filter
Top Products
7. Press the Enter key. The following display appears:
8. Do one of the following:
Table 47. Trace Status
If the Trace Status Is Go to Step
Waiting 9 on page 498
Error 1 on page 499 ( Formatting and Saving the
Communications Trace)
Other than waiting or error 12 on page 498
Select Trace Options
Configuration object....... TRNLINE
Type .............. LINE
Select one of the following:
1. All data (no filtering)
2. Remote controller data
3. Remote MAC address data
4. Remote SAP data
5. Local SAP data
6. IP protocol number
7. IP address data
Selection
1
F3=Exit F5=Refresh F12=Cancel
Work with Communications Traces
Type options, press Enter.
2=Stop trace 4=Delete trace 6=Format and print trace
7=Display message 8=Restart trace
Configuration
Opt Object Type Trace Description Protocol Trace Status
TRNLINE LINE TCP/IP TRACE TRN ACTIVE
F3=Exit F5=Refresh F6=Start trace F10=Change size
F11=Display buffer size F12=Cancel
Chapter 21. TCP/IP Problem Analysis
497