Filter
Top Products
2. End TCP/IP processing using the ENDTCP OPTION(*IMMED) command if all the
jobs are not there. Look for all the job logs associated with the jobs.
3. Change the job description message logging level for all the job description
objects to 4 0 *SECLVL. See “Working with the Job Log and Message Queues”
on page 438 for detailed information on the message logging levels.
4. Start TCP/IP processing again using the STRTCP command
5. Verify that all jobs are active.
6. Check the job logs if the appropriate jobs are not active.
Work with Active Jobs SYSNAM03
02/03/99 18:06:32
CPU %: .8 Elapsed time: 02:21:32 Active jobs: 93
Type options, press Enter.
2=Change 3=Hold 4=End 5=Work with 6=Release 7=Display message
8=Work with spooled files 13=Disconnect ...
Opt Subsystem/Job User Type CPU % Function Status
QSYSWRK QSYS SBS .0 DEQW
QMSF QMSF BCH .0 DEQW
QNEOSOEM QUSER ASJ .0 PGM-QNEOSOEM TIMW
QNEOSOEM QUSER BCH .0 PGM-QNEOSOEM TIMW
QNEOSOEM QUSER BCH .0 PGM-QNEOSOEM TIMW
QNPSERVD QUSER BCH .0 SELW
QPASVRP QSYS BCH .0 PGM-QPASVRP DEQW
QPASVRS QSYS BCH .0 PGM-QPASVRS TIMW
QPASVRS QSYS BCH .0 PGM-QPASVRS TIMW
More...
Parameters or command
===>
F3=Exit F5=Refresh F7=Find F10=Restart statistics
F11=Display elapsed data F12=Cancel F23=More options F24=More keys
Figure 248. Work with Active Jobs Display—Display 1
Chapter 21. TCP/IP Problem Analysis 435