Filter
Top Products
The session is ended by selecting ″communication″ followed by ″disconnect″ from
the menu bar.
Ending a Telnet Server Session
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
Starting Cascaded Telnet or DSPT Sessions
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
Using System Request Options
This material is covered in the AS/400e Information Center under the TCP/IP
topic. For more information see “TCP/IP Topics in the Information Center” on
page xv.
Telnet Scenarios for Establishing Cascaded Sessions
In Figure 126, you are establishing a Telnet session from Tokyo to Geneva after you
have established a Telnet session with Chicago.
1. From the Tokyo system, type STRTCPTELN CHICAGO.
2. From the Chicago system, type STRTCPTELN GENEVA.
You now decide to return to the Tokyo system as shown in Figure 127 on page 221.
1. Press the System Request key.
2. Select option 13 (Start system request at home system). You are shown the
System Request menu on the Tokyo system.
Figure 126. Establishing a Telnet Session with Three Systems
220 OS/400 TCP/IP Configuration and Reference V4R4
|
|
|
|
|
|
|
|
|