Filter
Top Products
2. Press F10 to display the job information for the spooled file.
3. Locate the spooled file that you want to send to another AS/400 system and
make note of the file, job, user name, and job number.
Note: Option 1 (Send) on the
Work with Spooled Files
display applies to sending
spooled files in an SNA network (using the SNDNETSPLF command). This
option does not apply to sending spooled files in a TCP/IP network.
Step 2 — Start the Spooled File Transfer
Specify SNDTCPSPLF and press F4 (Prompt). Complete the highlighted fields of
Figure 215 on page 348.
Specify the host name or the special value *INTNETADR to prompt for the Internet
address to which the spooled file is transferred. In the printer queue parameter,
specify the qualified output queue (library/outqueue) of the remote system to
receive that file.
In addition, specify the information from Figure 214 for the specific spooled file that
you want to send.
When transferring spooled files from an AS/400 to an AS/400, transformation of the
data stream is not necessary.
Work with All Spooled Files
Type options, press Enter.
1=Send 2=Change 3=Hold 4=Delete 5=Display 6=Release 7=Messages
8=Attributes 9=Work with printing status
File
Opt File Nbr Job User Number Queue Library
QPJOBLOG 1 QPADEV0004 HANS 058135 QEZJOBLOG QUSRSYS
QPJOBLOG 1 P23XYG41F HANS 058220 QEZJOBLOG QUSRSYS
QPCSMPRT 3 P23XYG41F HANS 058406 PFEIFFER PFEIFFER
QPDCLINE 4 P23XYG41F HANS 058406 PFEIFFER PFEIFFER
QPJOBLOG 1 P23XYG41 HANS 058405 QEZJOBLOG QUSRSYS
QPJOBLOG 5 P23XYG41F HANS 058406 QEZJOBLOG QUSRSYS
QPCSMPRT 1 P23XYG41F HANS 058480 PFEIFFER PFEIFFER
QPCSMPRT 2 P23XYG41F HANS 058480 PFEIFFER PFEIFFER
QPCSMPRT 3 P23XYG41F HANS 058480 PFEIFFER PFEIFFER
QPCSMPRT 4 P23XYG41F HANS 058480 PFEIFFER PFEIFFER
Bottom
Parameters for options 1, 2, 3 or command
===>
F3=Exit F10=View 2 F11=View 1 F12=Cancel F22=Printers F24=More keys
Figure 214. Spooled Files Job Information
Chapter 11. Line Printer Requester (LPR) 347