Filter
Top Products
Setting up for 3270 Full-Screen Mode
You can use the CFGTCPTELN command to set up your 3270 full-screen mode
session.
Step 1—3270—Starting the Telnet Server Job
The server job for a TCP/IP application must be started in the QSYSWRK
subsystem. The Start TCP/IP Server (STRTCPSVR) command starts the servers
that are shipped with the TCP/IP Utilities licensed program.
Even though the Change Telnet Attributes (CHGTELNA) command has an
AUTOSTART parameter, that parameter is overridden or ignored by the
STRTCPSVR command.
TCP/IP
TCP/IP
Non-IBM
Terminal
Devices
3277
3278
3279
AS/400 System
IBM System
Other System
TELNET
3270
Client
Support
Virtual
Device
Description
TELNET
Server
Support
RV2H000-2
Figure 120. Configuration Example of 3270 Telnet Server Support
Configure TCP/IP TELNET
System: SYSNAM01
Select one of the following:
1. Change TELNET attributes
6. Display 3270 keyboard map
7. Change 3270 keyboard map
8. Set 3270 keyboard map
Work with associated system values:
10. Autoconfigure virtual devices
11. Limit security officer device access
12. Inactive job time-out
13. Inactive job message queue
14. Limit device sessions
15. Action to take for failed sign-on attempts
16. Maximum sign-on attempts allowed
More...
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel
Figure 121. CFGTCPTELN in 3270 Full-Screen Session
Chapter 6. Telnet Server 187