Filter
Top Products
4. Continue with “Formatting and Saving the Communications Trace” to format and
save the trace.
Formatting and Saving the Communications Trace
1. Type a 6 in the Option column next to the name of the stopped line or line with
a trace status of error that you want to format and print.
2. Press the Enter key. For example, the following two displays appear for a
token-ring protocol:
Note: The format choices shown in this display are not available for every
protocol.
Work with Communications Traces
Type options, press Enter.
2=Stop trace 4=Delete trace 6=Format and print trace
7=Display message 8=Restart trace
Configuration
Opt Object Type Trace Description Protocol Trace Status
TRNLINE LINE TCP/IP TRACE TRN STOPPED
F3=Exit F5=Refresh F6=Start trace F10=Change size
F11=Display buffer size F12=Cancel
Format Trace Data
Configuration object ....: TRNLINE
Type ............: LINE
Type choices, press Enter.
Controller.......... *ALL *ALL, name
Data representation ..... 3 1=ASCII, 2=EBCDIC, 3=*CALC
Format RR, RNR commands . . . N Y=Yes, N=No
Format Broadcast data .... Y Y=Yes, N=No
Format MAC or SMT data only . N Y=Yes, N=No
Format UI data only ..... N Y=Yes, N=No
Format SNA data only..... N Y=Yes, N=No
Format TCP/IP data only . . . N Y=Yes, N=No
Format IPX data only .... N Y=Yes, N=No
F3=Exit F5=Refresh F12=Cancel
Chapter 21. TCP/IP Problem Analysis
499