Filter
Top Products
4. When you add FTP server exit programs, end and restart the FTP servers to
ensure that all servers are using the exit programs. See “Ending and Restarting
FTP Server Jobs” on page 282 for instructions on how to do this.
When you add workstation gateway server exit programs, you do not need to
end and restart the workstation gateway server. The WSG server checks for the
exit program dynamically.
When you add REXEC server exit programs, you do not need to end and
restart the REXEC server. The REXEC server checks for the exit programs
dynamically.
Removing Exit Programs
To remove an exit program from an exit point, do one of the following:
v Follow the steps for adding an exit point until the Work with Exit Programs
display is shown. Select option 4 (Remove) to remove the exit program.
v Use the Remove Exit Program (RMVEXITPGM) command.
Add Exit Program (ADDEXITPGM)
Type choices, press Enter.
Exit point...........>QIBM_QTMT_WSG
Exit point format .......>QAPP0100 Name
Program number.........>1 1-2147483647, *LOW, *HIGH
Program ............>YOURPGM Name
Library ...........> YOURLIB Name, *CURLIB
Text 'description'.......>'Description of your exit program'
Additional Parameters
Replace existing entry.....>*NO *YES, *NO
Create exit point ....... *NO *YES, *NO
More...
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Figure 298. Adding an Exit Program — Display 3
Add Exit Program (ADDEXITPGM)
Type choices, press Enter.
Exit program data:
Coded character set ID.... *JOB Number, *NONE, *JOB
Length of data........ 0-2048, *CALC
Program data.........
...
Figure 299. Adding an Exit Program — Display 4
540 OS/400 TCP/IP Configuration and Reference V4R4