Filter
Top Products
G.SHDSL Port Configuration window 112
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 9 • G.SHDSL (Model 3096RC)
Payload Rate (gshDSLPayloadRate)
Display-only on the G.SHDSL Port Status page. Configurable on the G.SHDSL Port Details window.
Shows the currently defined payload rate (i.e. data rate as opposed to line rate) for the G.SHDSL link. The fol-
lowing values of Payload Rates may be defined for T-DAC G.SHDSL ports:
Error Code (gshDSLErrorCode)
Display-only.
• noError(0)
• errorOne(1)
• errorTwo(2)
• errorThree(3)
• errorFour(4)
• errorFive(5)
• errorSix(6)
• errorSeven(7)
Saving your work
Once you have defined your desired values for the configurable parameters shown in the G.SHDSL Port Status
table, you must click either of the two Submit buttons to save your settings into volatile DRAM. Clicking
either of the submit query buttons will save the configurable parameter values displayed for all 16 G.SHDSL
ports. Once you click the button, the T-DAC will implement the changes immediately.
Note
To save your changes permanently, (i.e. when the T-DAC is powered
down) you must visit the T-DAC HOME page, and click the Save
Current Configuration button. When you click the Save Current
Configuration button, the T-DAC will copy the configuration cur-
rently stored in volatile DRAM into non-volatile Flash memory for
permanent storage.
• r64(1) • r128(2) • r192(3) • r256(4) • r320(5) • r384(6)
• r448(7) • r512(8) • r576(9) • r640(10) • r704(11) • r768(12)
• r832(13) • r896(14) • r960(15) • r1024(16) • r1088(17) • r1152(18)
• r1216(19) • r1280(20) • r1344(21) • r1408(22) • r1472(23) • r1536(24)
• r1600(25) • r1664(26) • r1728(27) • r1792(28) • r1856(29) • r1920(30)
• r1984(31) • r2048(32) • r2112(33) • r2176(34) • r2240(35) • r2304(36)