Filter
Top Products
PPP-IPCP Chassis Management Channel 164
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 11 • In-band management
Example 1: Routed PPP (IPCP) Chassis Management Channel
This example is to make a routed-PPP chassis management channel between three T-DAC’s, which may be any
of the Models’ 3096RC, 3196RC or 2616RC. The channels are defined as follows:
In the discussion of this example of Chassis Management Channels, call the gateway T-DAC Root and non-
gateway T-DACS Nodes. Assume the gateway T-DAC resides in slot 3, with additional T-DACS in slots 4 and
5 (see figure 94). With this configuration, define the default gateway parameters as follows:
• The Root T-DAC in slot 3 functions as the in-band management gateway for the T-DACS in slots 4 and 5.
Do not check the Default Gateway box (see figure 94).
• The Node T-DAC in slot 4 will connect via a Chassis Management Channel to the Root T-DAC in slot 3.
Checking the Default Gateway box in the slot-4 Node T-DAC automatically adds the IP address of the slot-
3 master T-DAC to its IP routing table as the default gateway. Do check the Default Gateway box (see
figure 94).
• The Node T-DAC in slot 5 similarly connects to the Root T-DAC in slot 5 via a Chassis Management Chan-
nel. Checking the Default Gateway box in the slot-5 Node T-DAC automatically adds the IP address of the
slot-3 master T-DAC to its IP routing table as the default gateway. Do check the Default Gateway box (see
figure 94).
Define button
Click the Define button to create the Chassis Management Channel. After both ends of the Chassis Manage-
ment Channel have been created, the link should shortly be in the UP state.
Figure 95 shows the creation of a Chassis Management Channel.
Figure 95. Define a Chassis Management Channel
Model 3096RC (slot 3—root)
to
Model 2616RC (slot 4—node)
IP address: 192.162.10.3/24 IP address: 192.162.10.4/24
Name: to2616RC Name: to3096RC
IPCP IPCP
IP address: 192.162.10.4 IP address: 192.162.10.3
Tx: H.110 Port 1:1 --------> Rx: H.110 Port 1:1
Rx: H.110 Port 1:2 <-------- Tx: H.110 Port 1:2
Check Default Gateway box.
Model 3096RC (slot 3—root)
to
Model 3196RC (slot 5—node)
IP address: 192.162.10.3/24 IP address: 192.162.10.5/24
Name: to3196RC Name: to3096RC
IPCP IPCP
IP address: 192.162.10.5 IP address: 192.162.10.3
Tx: H.110 Port 1:3 --------> Rx: H.110 Port 1:3
Rx: H.110 Port 1:4 <-------- Tx: H.110 Port 1:4
Check Default Gateway box.