Filter
Top Products
IP Addressing Overview window 189
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 12 • IP (IP, TCP, UDP, & ICMP)
Note
To save your changes permanently, you must visit the T-DAC
HOME page, and click the Save Current Configuration button.
When you click the Save Current Configuration button, the T-
DAC will copy the configuration currently stored in volatile DRAM
into non-volatile Flash memory for permanent storage.
IP Addressing Overview window
The IP Addressing Overview window (ipAdEntAddr) window (see figure 105) provides the means for you to
view the default address for outgoing IP datagrams, the IP addresses defined for the T-DAC and the interface
ID associated with each address.
Figure 105. IP Addressing Overview window
For each IP address on the page, there is a Details hyperlink. Clicking the Details hyperlink displays the IP
Address Details window.
IP Address Details window
The IP Address Details window (see figure 106) displays the contents of the T-DAC’s IP address table for each
network interface defined on the blade. To display the IP Address Details window, on the IP Addressing Over-
view window, select the interface you wish to view, and click the Details hyperlink.
Figure 106. IP Address Details window
Entry Interface Index (ipAdEntIfIndex)
The index value that identifies the interface to which this entry applies.
Entry Subnet Mask (ipAdEntNetMask)
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the
network bits set to 1 and all the hosts bits set to 0.
Entry Broadcast Address (ipAdEntBcastAddr)
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the interface
associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address
is used, the value will be 1. This value applies to both the subnet and network broadcast addresses used by the
entity on this interface.