Filter
Top Products
PPP-IPCP Chassis Management Channel 166
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 11 • In-band management
Figure 98. Defined In-Band Management Channels
Click on the Modify Management Channels… link. You are now able to select ppp-bcp(2) in the Protocol
Type column. Then click on Modify button in the Action column.
2. We will now create the other end of the BCP PPP link on the 3096RC which is named to2616RC. Note
that the IP address is the same as the IP address of the 3096RC. Also, the Tx port is the same as the RX
port which we configured above. Similarly with the Rx port. One important point is that the management
channel is selected as the default gateway.
Figure 99. Define an H.110 Management Channel
3. The Protocol Type must also be changed to BCP, ppp-bcp(2), in the same manner as was done in step 1.
4. After the bridged PPP link is UP, the web page will resemble figure 100 on the 2616RC.
Figure 100. Defined In-Band Management Channels