Filter
Top Products
System Status Overview window 252
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 17 • System
Refresh Rate parameter
This parameter (see figure 135 on page 251) selects how often the System Status Overview window is refreshed.
The user-selectable options are:
• none(0)
• rate10sec(10)—Refresh every 10 seconds
• rate15sec(15)—Refresh every 15 seconds
• rate30sec(30)—Refresh every 30 seconds
• rate1min(60)—Refresh every minute (60 seconds)
• rate2min(120)—Refresh every 2 minutes (120 seconds)
• rate3min(180)—Refresh every 3 minutes (180 seconds)
• rate5min(300)—Refresh every 5 minutes (300 seconds)
Click Modify after selecting the desired refresh rate.
Figure 136. System Status table
Figure 137. Alarm symbols
System Status table
The System Status table (see figure 136) displays the following parameters:
• Alarm—A flashing red star (see figure 137) indicates there is an alarm condition in the box. A green square
denotes that no alarms are present and functioning properly.
Note
If there is a flashing red indicator, go to the appropriate chapter listed
in table 6 on page 253.
• Board Temp.—Displays the internal temperature in Celsius (C)/Fahrenheit (F).
• Power supply. A flashing red star (see figure 137) indicates there is an alarm condition in the power supply.
A green square denotes that the power supply is functioning properly.
Green square
Flashing red star
Orange exclamation mark
Yellow triangle
Blue square