Filter
Top Products
Modify default packet settings window 224
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 14 • PPP
Authentication Technique (pppDefaultAuthenticationTechnique)
Technique to be used for authenticating:
• none(0)—No authentication will be used (default)
• pap(3)—password authentication protocol will be used
• chap(4)—challenge handshake authentication protocol will be used
• chapORpap(5)—chap will be negotiated first, if that fails, pap will be attempted
Authentication Side (pppDefaultAuthenticationSide)
This is the side of the link which will be authenticating:
• local(1)—local server will be authenticating. Remote needs to log into local server (default)
• remote(2)—remote server will be authentication. Local needs to log into remote server
Authentication Username (pppDefaultAuthenticationUsername)
This is the username that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the username that the remote sends will be compared to this username. Maximum size
is 40 characters.
Authentication Password (pppDefaultAuthenticationPassword)
This is the password that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the password that the remote sends will be compared to this username. Maximum size
is 40 characters.
MRU (pppDefaultInitialMRU)
This is the initial maximum received unit that will be negotiated for the link. This could possibly be changed
during PPP negotiations. Default is 1500.
Link Compression (pppDefaultLinkCompression)
This object enables the PPP link layer address and protocol field compression. When enabled the PPP negotia-
tions will DESIRE link compression but may disable the compression due the other end of the link not accept-
ing link compression. When disabled the PPP negotiations will FORCE no compression on the PPP link.
• enabled(1)—enable link compression
• disabled(2)—disable link compression (default)
Allow Magic Number Negotiation(pppDefaultMagicNumber)
Determines if magic number negotiation should be done
• enabled(1)—enable magic number negotiation
• disabled(2)—disable magic number negotiation (default)