Filter
Top Products
iDSL Port Configuration window 139
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 10 • iDSL (Model 3196RC)
CPE Device (idslRemoteModelCode)
Displays model number of Patton remote CPE device connected to the iDSL port, these include:
- none(0),
- model1092(17),
- model1092RC(18),
- model1092A(19),
- model1092ARC(20),
- model1082I(21),
- model1082C(22),
- model1082D(23),
- model1082F(24),
- model1082C-144(25),
- model1082D-144(26),
- model1082I-144(27)
CPE Circuit ID
Displays circuit ID of the remote CPE device connected to the iDSL port
Saving Your Work
Once you have defined your desired values for the configurable parameters shown in the iDSL Port Status
table, you must click one of the two Submit Query buttons to save your settings into volatile DRAM. Click-
ing either of the Submit Query buttons will save the configurable parameter values displayed for all 16 iDSL
ports. Once you click the button, the T-DAC will implement the changes immediately.
Note
To save your changes permanently, (i.e. when the T-DAC is powered
down) you must visit the T-DAC HOME page, and click the Save
Current Configuration button. When you click the Save Current
Configuration button, the T-DAC will copy the configuration cur-
rently stored in volatile DRAM into non-volatile Flash memory for
permanent storage.