Filter
Top Products
DLMI window 96
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 8 • Frame Relay
Message Ends (framerelRxMessageEnds)
The number of packets received with message-correct endings. This value increases each time a valid Frame
Relay packet is received.
Packets Too Long (framerelRxPacketTooLong)
The number of packets received that were too long.
Overflow (framerelRxOverflow)
The number of packets received with overflow (as indicated by software).
Aborts (FramerelRxAbort)
The number of packets received that were aborted.
Bad CRC (framerelRxBadCrc)
The number of packets received that had bad CRC values.
Invalid Frames (framerelRxInvalidFrame)
The number of packets received that had invalid frames.
Tx Underrruns (framerelTxUnderrun)
The number of times the transmit buffer was not replenished in time to be sent out on the line.
LINK Resets (framerelResets)
Number of times the link management (LMI) was reset.
Produce Status Change Trap (frTrapState)
This feature is not currently implemented.
DLMI window
Each Frame Relay instance with the T-DAC is known as the Data Link Management Interface or DLMI. The
T-DAC software currently supports one Frame Relay Link, or DLMI, on each of the T1/E1 WAN ports.
Frame Relay has a set of protocols responsible for maintaining the link. This is known as the management link
interface or LMI.