Filter
Top Products
G.SHDSL Port Details window 120
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 9 • G.SHDSL (Model 3096RC)
Figure 55. G.SHDSL port configuration section of the G.SHDSL Port Details window
Port configuration tables
The G.SHDSL Port Details window displays port configuration information in two port configuration tables,
located near the bottom of the window (see figure 55):
• CO Configuration—Displays certain G.SHDSL port parameters for the indicated G.SHDSL port on the T-
DAC (see “CO Configuration table” on page 121).
• CPE Configuration—Displays certain G.SHDSL port configuration parameters for the G.SHDSL CPE
device remotely connected to the specified G.SHDSL port on the T-DAC (see “CPE Configuration table”
on page 123).
Note
The CPE Configuration table will only appear when the T-DAC
G.SHDSL port has established a link to the remotely connected CPE
device.
The two tables display port parameters and operator-configurable port parameters in one of two modes:
• Display-only mode—You can view all the parameter values, but can not define any parameter values
(see figure 55).
Note
Clicking on the Change Config button (see figure 55) changes mode
from display-only to change mode. Clicking on the Cancel button
returns to display-only mode.