Filter
Top Products
G.SHDSL Port Details window 123
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 9 • G.SHDSL (Model 3096RC)
• Enable EOC (gshDSLEOCEnabled)—Defines whether the T-DAC can modify the remote CPE configura-
tion by downloading configurable port parameters to the remotely connected CPE device over the
G.SHDSL link. The following values may be defined:
- Yes(1)—Enable remote CPE configuration
- No(0)—Disable remote CPE configuration
CPE Configuration table
The CPE Configuration Table appears on the right side of the page. The table shows certain G.SHDSL Param-
eters for the CPE device remotely connected to the selected G.SHDSL port on the T-DAC. The T-DAC will
automatically retrieve the parameter values from the CPE every three minutes and update this table. The table
comprises two columns. The column labeled CPE Options shows the parameter names. The column labeled
CPE Configuration shows the corresponding current value for each parameter. The table displays the following
parameters:
• Model (gsRMModelCode)—Indicates the Patton model number of the remotely connected CPE device.
One of the following values will be displayed:
- notKnown(200)
- m3201A(2)
- m3201(3)
- m3241(7)
- m2157(6)
- m2156(5)
- m3086-C(4)
- m3086-D(10)
- m3086-K(8)
- m3086-F(9)
Interface Type (gsRMInterfaceType)—Defines the frame layer protocol the CPE device will use when encap-
sulating the data received on the G.SHDSL link for forwarding on another link. One of the following values
may be defined:
- hdlc(2)
- atm(1)
# of I-bits (gsRMIbitRate)—Indicates the number of I bits transmitted in each G.SHDSL frame. One of the
following values will be displayed:
- b0(0)
- b1(1)
- b2(2)
- b3(3)
- b4(4)