Filter
Top Products
System Log Configuration window 280
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 19 • System Log
• syslogFlashFull(1)—When Flash is rejecting system log messages because the message cache is full, the T-
DAC will set the value of syslogFlashClear(2) to syslogFlashFull(1). To correct this condition by erasing the
messages in (clearing) flash memory, select the value syslogFlashClear(2) from the drop-down menu, and
click the (submit query) button.
• syslogFlashClear(2)—When you set the value of syslogFlashClear to syslogFlashClear(2) and click the (sub-
mit query) button, the T-DAC will erase all system log messages stored in Flash.
System Log Configuration window
The System Log Configuration window (see figure 156) provides the means for you to view and modify the val-
ues of System Log parameters. The parameters define displays SysLog and SNMP Trap Daemon IP Address
locations, message priorities for the offered SysLog message destinations, and other priority and maintenance
information. To display the System Log Configuration window, on the System Log Overview window, click the
Modify… link.
Figure 156. System Log Configuration window
The following sections describe the System Log Configuration window parameters.
Note
When you are finished modifying the parameters, click the Modify
button to apply the changes.
Daemons
This portion of the System Log Configuration window displays the parameters that define the IP address for the
SysLog Daemon and the IP address for the SNMP Trap Daemon.