Filter
Top Products
Defining a T1/E1 Management Channel 157
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 11 • In-band management
Figure 88. Defined In-Band Management Channels section
Note
You can also directly access the DLCI configuration page by clicking
on the DLCI… link under the IP Address and IP Mask columns.
From the DLCI configuration page, you can view current statistics.
For complete information on configuring a Frame Relay link, refer to
chapter 8, “Frame Relay” on page 91.
Deleting the T1/E1 management channel
1. If you need to change the parameters for the T1/E1 management channel, you must first delete it and cre-
ate a new one by clicking on T1/E1 in the Interface Type column. The WAN Circuit CONFIGURATION
LINK: 1 page displays (see figure 89).
Figure 89. WAN Circuit Configuration Link window
2. Click on the Channel Assignment… hyperlink, change the channel assignments from Frame Relay to Clear,
and click on Submit Query.
3. Go back to the In-Band Management Overview to verify that the T1/E1 management channel has
been deleted.