Filter
Top Products
Line Status—Configuration 295
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 20 • T1/E1 Link
Line Status—Configuration
Clicking on the Line Status—Configuration hyperlink in the T1/E1 Link Activity Ports page displays the WAN
Circuit Configuration hyperlink page (see figure 164). This page contains general information about the WAN
interface, including the type of line (D4 Superframe or Extended Superframe), type of line coding (B8ZS or
AMI), Near and Far End Line Statistics, and Line Status. On this page, is the ability to modify the Line Interface
Settings and Test Settings by clicking on the Modify Configuration link as well as modifying the channel assign-
ments by clicking on the Channel Assignments link. Also on this page is the ability to retrieve both Near and Far
End Line Statistics by clicking on Current, History, or Totals.
Figure 164. WAN Circuit Configuration Link window
Note
Click on the Modify link to change the settings of any of the follow-
ing parameters (see “WAN Circuit Configuration—Modify” on
page 296).
The WAN Circuit Configuration window also displays the amount of time that has passed, the number of inter-
vals passed during which valid data was collected, and a measurement of received signal quality.
Time Elapsed (dsx1TimeElapsed)
The number of seconds that have elapsed since the beginning of the current error-measurement period.