Filter
Top Products
IP Routing Table window 194
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 12 • IP (IP, TCP, UDP, & ICMP)
• rip(4)—Learned via reception of RIP packet.
• icmp(5)—Learned via reception of ICMP packet.
Seconds Since Updated (genRouteAge)
The number of seconds since this route was last updated or otherwise determined to be correct.
Tag (genRouteTag)
An identifier associated with the route. This can have different meanings depending on the protocol. For exam-
ple, this gives the tag that was passed with a learned RIP route.
Gateway (genRouteGateway)
Specifies the IP address to which the packets should be forwarded. Type the address, then click the Modify
button next to the Gateway text box.
Cost (genRouteCost)
This is the cost of the route as defined by RIP standards. Cost is sometimes considered to be number of hops.
A cost of 16 is considered to be infinite. A cost can be given to user-entered routes so their preference in rela-
tion to learned routes can be calculated. Type the cost value, then click the Modify button next to the Cost
text box.
State (genRouteState)
Defines the state which a route may be in during its lifetime.
• invalid(1)—This setting deletes the route.
• active(2)—A valid route is in use.
• nopath(3)—No route is available to the specified gateway. The gateway is not known to local networks.
• agedout(4)—Invalid route (soon to be removed).
• costly(5)—A valid route, but not in use because of it’s higher cost.
Select the desired state from the menu, then click the Modify button next to the State menu.
IP Routing Table window
The IP Routing Table window (see figure 109) displays the IP forwarding parameters for all routes in the T-
DAC’s IP Routing table. To display the IP Routing Table window, on the IP Route Overview window (see
figure 107 on page 190), click the Display IP Routing Table link.
Figure 109. IP Routing Table window