Filter
Top Products
System Log Overview window 276
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 19 • System Log
The System Log main window provides hyperlinks to the System Log (configuration), System Log (volatile
Memory) and System Log (Non-Volatile Memory) windows, as shown in figure 153.
Figure 153. System Log windows map
You can use the System Log Overview windows to
• View and define configurable parameters that control the operation of the System Log subsystem
• View the System Log messages the T-DAC currently stores in
- Volatile Memory
- Non-Volatile memory
The following sections describe the contents of the System Log Overview window.
Figure 154. Hyperlinks section of the System Log Overview window
Hyperlinks
The System Log Overview window displays the following hyperlinks (see figure 154):
• Modify—Clicking on the Modify… link next to the System Log Parameters displays the System Log Configu-
ration window. You can use the System Log Configuration window to view and modify the values of syslog
configurable parameters. The System Log Configuration window is described in section “System Log Config-
uration window” on page 280
• Volatile Memory—Clicking on the Volatile Memory… link displays the System Log Messages in Volatile Mem-
ory window, where you can view the system log messages currently stored in the T-DAC’s volatile Direct
Random Access Memory (DRAM). The System Log Messages in Volatile Memory window is described in sec-
tion “System Log Messages in Volatile Memory window” on page 283
System Log
Configuration (Modify)
System Log
System Log
Volatile Memory
System Log
Non-Volatile Memory