Filter
Top Products
System Parameters window 263
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 17 • System
Modify Parameters window
The System Parameters Configuration window (see figure 144) provides the means for you to modify the values
for T-DAC System configurable parameters in the SNMP and HTTP, and Installation tables. To display the
System (configurable parameters) window, on the System Parameters window, click the Modify Parameters…
link (see figure 143 on page 260).
The following sections describe the configurable parameters displayed on the System Parameters
Configuration window.
Installation
This portion of the System window shown in figure 144 on page 262 contains information described in the
following sections.
System Manager (sysContact)
This SNMP variable represents the textual identification of the contact person for this managed node, together
with information on how to contact this person as defined by specification RFC1213.MIB.
Module Name (sysName)
This is “An administratively assigned name for this managed node. By convention, this is the node’s fully-
qualified domain name.” (RFC1213.MIB)
Physical Location (sysLocation)
“The physical location of this node (e.g., ‘telephone closet, 3rd floor’).” (RFC1213.MIB)
Web Settings (boxBackgroundFlag)
The following options are available:
disableGraphics(0)—When this option is selected, graphics on WWW pages will not be displayed. This
results in faster page display times, but may make it more difficult to navigate WWW sites that rely heavily
on graphics.
enableGraphics(1)—When this option is selected, graphics on WWW pages are displayed.
disableWeb(2)—When this option is selected, access to the WWW pages is denied for everyone.
Monitor Privilege (boxMonitorPrivilege)
Specifies the privileges given to the monitor user. Privileges can be removed or additional write access can be
given beyond read-only access. The following options are available:
• none(0)—The monitor user can not log in.
• read only(2)—This is the default setting. The monitor user can view but not change any parameters. Mon-
itor can not view passwords.
• writeUser(18)—The monitor user can change all parameters—except passwords— under authentication,
drop-and-insert, and dial-in links.
• writeUserlp(50)—The monitor user can change all parameters—except passwords— under authentication,
drop-and-insert, dial-in, and IP links.