Filter
Top Products
IP Filter Configuration window 211
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 13 • IP Filtering
Address (filterIpSourceIp)
The IP address to which the filter will compare the source IP address.
Mask (filterIpSourceMask)
The subnet mask the filter will apply to the source IP address to make the comparison.
Note
These fields are ignored unless either the IP address or Mask have
been entered. Bit positions that are set to 1 will be compared and 0s
will be ignored. Thus, a setting of 0.0.0. will have the effect of dis-
abling source IP address comparison.
Destination IP
Applies the action based on the results of the stated comparison to the IP address and subnet mask.
Comparison (filterIpDestinationAddressCmp)
• equal(0) – apply the action of the filter if the destination IP equals the IP address/subnet mask combination
supplied
• notEqual(1) – apply the action of the filter if the destination IP does not equal the IP address/subnet mask
combination supplied
Address(filterIpDestinationIp)
The IP address the filter will apply to the destination IP address to make the comparison.
Mask(filterIpDestinationMask)
The subnet mask the filter will apply to the destination IP address to make the comparison.
Note
These fields are ignored unless either the IP address or Mask have
been entered. Bit positions that are set to 1 will be compared and 0s
will be ignored. Thus, a setting of 0.0.0. will have the effect of dis-
abling destination IP address comparison.
Source Port
Applies the filter action based on the stated comparison to the source port number (TCP or UDP)
Comparison (filterIpSourcePortCmp)
• noCompare(0) – no comparison to the source port in the IP packet
• equal(1) – the source port in the IP action must be the same for the filter to be applied
• lessThan(2) – the source port in the IP packet must be less than the source port specified for the filter to be
applied
• greaterThan(3) – the source port in the IP packet must be greater than the source port specified for the filter
to be applied
Port (filterIpSourcePort)
The port number to be compared to the source port in the IP packet