Filter
Top Products
Configuring static connections using the long form 68
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 5 • DS0 Mapping
Note
Both channels of the connection can be T1/E1 or both sides can be
G.SHDSL (Model 3096RC) or iDSL (Model 3196RC) or just the B
channel could be configured (in the event you needed to create an
H.110 loopback).
The options are:
• none(0)
• t1-e1(1)—T1/E1 WAN ports for connection to a T1/E1 WAN line
• gshDSL(4)—G.SHDSL ports for connection to a G.SHDSL modem (Model 3096RC) or
iDSL(2)—iDSL ports for connection to an iDSL modem (Model 3196RC).
Device Type B (daxDeviceTypeFromgshDSL) (daxDeviceTypeRxgshDSL)
The Dev Type B menu defines the type of interface port the T-DAC will use for the B channel of this connection.
The user has the option of selecting a T1/E1 device, a DSL device, or the H.110 midplane (the H.110 selection
can only be done from the B channel selection because it requires a To and From direction identifier.
Note
On the DS0 Mapping window, under Device B, there are two rows of
parameter fields for defining H.110 connections. When defining a T1/
E1 or DSL connection, do not define the parameters in the second row
(i.e. leave the menu set to none(0)). When defining an H.110 connec-
tion, you must define values for all parameters in both rows.
Each connection to the H.110 bus consists of a pair of logical ports. The T-DAC transmits data to the H.110
bus using one logical port, and receives data from the H.110 bus on a different logical port. Under Device B,
the DS0 Mapping page provides two rows of parameter fields for defining H.110 connections. When defining
an H.110 connection, you must define values for all parameters in both rows. The parameters in the first row
under Device B define the transmit port (to the H.110 bus) and parameters in the second row under Device B
define the receive port (from the H.110 bus).
In the first row, the following options are available for Dev Type B:
• none(0)
• t1-e1(1)—T1/E1 WAN ports for connection to a T1/E1 WAN line
• gshDSL(4)—G.SHDSL ports for connection to a G.SHDSL modem (Model 3096RC) or
iDSL(2)—iDSL ports for connection to an iDSL modem (Model 3196RC)
• toH110(5)—H.110 port for transmitting data to the H.110 bus via the CPCI chassis backplane.
In the second row, the following options are available for Dev Type B:
• none(0)
• fromH110(6)—H.110 port for receiving data from the H.110 bus via the CPCI chassis backplane.
Device Number A (daxDeviceNumberTogshDSL) and Device Number B
(daxDeviceNumberFromgshDSL) (daxDeviceNumberRxgshDSL)
The parameters labeled Dev Num A and Dev Num B define the ports the T-DAC will use for channel A and
channel B. The Device Number will correspond to one of the T-DAC’s 16 G.SHDSL (Model 3096RC) or