Filter
Top Products
Introduction 34
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 1 • Introduction
Introduction
You can manage the Model 2616RC T1/E1 Time Division Multiplexed (TDM) Digital Access Concentrator
(T-DAC), Model 3096RC G.SHDSL TDM T-DAC, or Model 3196RC iDSL TDM T-DAC by using its
internal HTTP/HTML Web Management windows. However, to access the HTTP/HTML windows, you
must first define:
• The T-DAC system’s LAN IP method to obtain address
• LAN IP address
• LAN IP subnet mask for the T-DAC
If you have not defined the above parameters, refer to the procedures in your T-DAC model’s User Manual,
available online at www.patton.com/manuals.
Logging into the HTTP/HTML Web Management windows
To log into the HTTP/HTML Web Management windows, you must enter the 4-octet Internet Protocol (IP)
address (for example, http://your.server.ip.address) as the Universal Resource Locator (URL) into a World-Wide
Web (WWW) browser. After you enter the IP address, the T-DAC will ask for your user name and password as
shown in figure 1.
Figure 1. T-DAC login window
Your T-DAC will accept the following default administrative passwords:
• superuser—this password carries full permission to change and view any parameters in the T-DAC
• monitor—this password allows full viewing of any non-password oriented variables.
Note
For security reasons, we recommend that you change these passwords
immediately after initial configuration.