Filter
Top Products
System Status Overview window 251
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 17 • System
Figure 135. Physical status table and Refresh Rate menu
Physical status table
The Physical Status section of the System Status Overview window (see figure 135) lists the possible conditions
of the T-DAC components (see table 5).
Table 5. Physical states
Item Setting Description
Front handle switch Open The switch on at least one of the two front handles is open, indicating that the
handle is unlocked. When both handles are unlocked, the blue READY LED
status indicator on the T-DAC’s front panel will light, indicating that the T-DAC
front blade is ready for removal. The T-DAC can then be removed from the
CPCI chassis.
Closed Both front handle switches are closed, indicating that the handles are locked
and the T-DAC cannot be removed from the cPCI chassis.
Rear handle switch Open The switch on at least one of the two rear handles is open, indicating that the
handle is unlocked. When both handles are unlocked, the blue READY LED
status indicator on the T-DAC’s rear blade will light, indicating that the rear
blade is ready for removal. The rear blade can then be removed from the
CPCI chassis.
Front
READY
LED
(blue)
On The blue READY LED status indicator on the T-DAC’s front panel is lit, indicat-
ing the switches on both front handles are open and the handles are
unlocked, so the T-DAC is ready to be removed from the CPCI chassis.
Off The blue READY LED status indicator on the T-DAC’s front panel is not lit, indi-
cating that the switches on at least one of the front handles are closed and the
handle(s) are unlocked: the T-DAC is not ready for removal, and therefore
cannot be removed from the CPCI chassis.
Rear READY LED
(blue)
On The blue READY LED status indicator on the rear blade is lit, indicating that
the switches on both rear handles are open and the handles are unlocked, so
the rear blade is ready to be removed from the CPCI chassis.
Off The blue READY LED status indicator on the rear blade is not lit, indicating
that the switches on at least one of the rear handles are closed and the han-
dle(s) are unlocked: the rear blade is not ready for removal, and therefore
cannot be removed from the CPCI chassis.