Filter
Top Products
Alarms management windows 52
Models 2616RC, 3096RC & 3196RC Admin Reference Guide 4 • Alarms
Figure 15. Alarms management diagram
Figure 16. Alarm System Configuration window
Alarms management windows
As shown in figure 13 on page 50, the Alarms System Overview window provides links to the following alarm
system management windows:
• Modify Parameters—links to the Alarm System Configuration window (see figure 16) for configuring the
alarm response system with the IP addresses of one or more administrators who should be notified in case of
an alarm (refer to section “Alarm System Configuration window”).
• Modify Severity—links to the Alarm Severity Configuration window (see figure 18 on page 54) where you can
configure the severity (importance) of each alarm. For each alarm, you can defined the value of Alarm Sever-
ity as critical, major, minor, informational, or ignore. Defining an alarm’s severity as ignore disables that alarm.
(refer to section “Alarm Severity Configuration” on page 54).
Alarm System Configuration window
When an alarm condition occurs, by default the T-DAC does the following to notify administrators of the alarm:
• Activates the front and rear panel Alarm LEDs.
• Activates the alarm indications on the T-DAC web management windows (as color-coded highlighting on
the HOME window and as a color-coded symbol on the System Status window).
Alarm System Overview
Configure Alarm
System Parameters
Configure Alarm
Severity