Filter
Top Products
3. Click <OK>.
The basic information of the virtual storage resource is modified.
7.10.4 Changing Disk Resource Basic Information
This section explains how to modify the basic information for disk resources.
The following settings can be changed.
- Label
- Comments
Use the following procedure to modify the basic information for disk resources
1. Select the target virtual storage in the ROR console storage tree.
The disk resource list is displayed in the [Resource List] tab.
2. From the disk resource list, right-click the target disk resource, and select [Modify]-[Registration Settings] from the displayed menu.
The [Resource Change Setting] dialog is displayed.
3. Modify the values for the following items:
Label
Enter up to 32 alphanumeric characters or symbols.
Comments
Enter up to 256 alphanumeric characters or symbols.
4. Click <OK>.
The basic information for disk resources is modified.
7.11 Changing BMC BladeLogic Server Automation Settings
This section explains how to change BMC BladeLogic Server Automation settings.
The following settings can be changed.
- Label
- Comments
Use the following procedure to perform setting changes for BMC BladeLogic Server Automation:
1. In the ROR console management software tree, right-click the target management software(BladeLogic), and select [Modify]-
[Registration Setting] from the popup menu.
The [Modify Management Software(BladeLogic)] dialog is displayed.
2. Set the following items:
Label
Enter the Label of the Management software.
Enter up to 32 alphanumeric characters or symbols.
Comments
Enter the Comment of the Management software.
Enter up to 256 alphanumeric characters or symbols.
3. Click <OK>.
The target BMC BladeLogic Server Automation settings are changed.
- 87 -